Successful refurbishment of concrete with PCI products

• For indoor and outdoor use.
• For later doweling of joints in screeds.
• To prevent height offset around the joints.
• Suitable for all types of mineral screeds, also for heated screeds.

PCI Apogel E

• Suitable for the sealing injection of damp or dry cracks and voids in structural members made of mineral building materials.
• For producing bonds with a limited extensibility.
• For the durable sealing of cracks pre-injected with PCI Apogel PU.

PCI Apogel PU

• Rapidly expanding injection resin; stops rush of water in water-bearing cracks. The subsequent injection with PCI Apogel E provides a durable seal.

PCI Apogel F

PCI Apogel-Schnell

• For indoor and outdoor use.
• For floors, walls and overhead application.
• For casting cracks and dummy joints in screeds.
• For injecting cracks, dummy joints and voids in concrete and screed.
• Suitable also for damp crack sides.
• For static sealing between cracked elements made of concrete and screed.
  
  In addition:
  PCI Apogel-Schnell
• Application especially at low temperatures and if time is a factor.
  PCI Apogel F
• For embedding PCI Apogel dowels.

PCI Apogel E

• Suitable for the sealing injection of damp or dry cracks and voids in structural members made of mineral building materials.
• For producing bonds with a limited extensibility.
• For the durable sealing of cracks pre-injected with PCI Apogel PU.

PCI Apogel PU

• Rapidly expanding injection resin; stops rush of water in water-bearing cracks. The subsequent injection with PCI Apogel E provides a durable seal.

• For floors in the interior and exterior (at dry conditions during the installation).
• For casting cracks and dummy joints in mineral screeds.
• For cracks and joints up to a width of approx. 5 mm.
• For producing static bonds.
• Suitable for underfloor heating.
• For gluing metal profiles and nail strips.
• For embedding PCI Apogel Dübel dowels in screed joints.

PCI Apogel F

PCI Apogel-Schnell

• For indoor and outdoor use.
• For floors, walls and overhead application.
• For casting cracks and dummy joints in screeds.
• For injecting cracks, dummy joints and voids in concrete and screed.
• Suitable also for damp crack sides.
• For static sealing between cracked elements made of concrete and screed.
  
  In addition:
  PCI Apogel-Schnell
• Application especially at low temperatures and if time is a factor.
  PCI Apogel F
• For embedding PCI Apogel dowels.

• For indoor and outdoor use.
• For walls and floors.
• For repairing wear surfaces and break-outs in concrete floors and cement screeds, pre-fabricated concrete elements, reinforced concrete supports, concrete pipes and similar.
• For covings.
• For repairing and reprofiling garage door thresholds, edge of steps and joint sides.
• For repairing small-area damaged spots before applying subsequent coatings or sealers.
• For levelling worn-out steps.
• For thin layers from 2 mm thickness in floor areas.

• For indoor and outdoor use.
• For walls and soffits.
• For cosmetic work on concrete components.
• For the restoration of damaged edges and corners.
• For large surfaces.
• For repairing irregular wall surfaces.
• For repairing cement render.
• For filling honeycombs and cavities.
• Layer thickness for break-outs 1 to 10 mm.
• Layer thickness for large surfaces 1 to 7 mm.

• Water-repellent agent in the form of a cream for the creation of retroactive damp-proof courses in masonry.
• For sealing capillaries and hairline cracks.
• Can also be used with high moisture contents (up to about 95%) in the masonry.
• Especially well-suited for visible masonry (bricks, natural stones) and aerated concrete.
• PCI Barra Creme can be applied using proprietary cartridge guns with or without electric support.
• Follow the requirements of the WTA code of practice (masonry injections against capillary moisture) for the planning and implementation of rehabilitation work.

• For the silification and hydrophobization of brickwork and cementitious substrates.
• For brickwork with a moisture penetration level of max. 40% to 60%. 

PCI Barra Inject is a cementitious suspension that is suitable for the following applications:

• For filling and/or injecting cracks and cavities in brickwork, such as double leaf masonry with loose material in the core and cracks up to 5 mm.
• For filling before or after the installation of a damp-proof course using PCI Barra Creme or PCI Barra Gisol.
• For filling spaces when subsequently installing a horizontal waterproofing in the stone saw method (e.g. plastic films, stainless steel sheets).

• For floors.
• For indoor and outdoor use.
• For the production of highly wear resistant and chemical resistant screeds on concrete floors and cement screeds
  - for industrial floors, workshops and stables subject to high chemical and/or mechanical loads,
  - in breweries, dairies and other wet locations.
• For grouting and tamping.
• For water permeable mono-granular mortar for the installation of kerbstones on bridges.
• For repair work on concrete floors and slabs.

• For indoor and outdoor use.
• For walls and overhead application.
• Coloured finish of concrete facades and render facades which must be protected against water and pollutant gases such as carbon dioxide, sulphur dioxide or chloride.
• Surface protection of concrete facades against carbonation and corrosion of reinforcing steel.

• For indoor and outdoor use.
• For walls and overhead application.
• Slightly pigmented design of concrete and plaster/render facades.
• Protection against water and pollutant gases such as carbon dioxide, sulphur dioxide or chloride.
• Surface protection of concrete facades against carbonation and corrosion of reinforcing steel.

• Anthracite-coloured pigmentation for various grey colour shades.
• For indoor and outdoor use.

• For indoor use.
• For walls and ceilings.
• Helps improve adhesion of conventional plaster applied by machine or hand as well as gypsum-lime plaster to smooth concrete and sand-lime brick.
• Bonding slurry for ceiling plaster.

• For indoor and outdoor use.
• Mineral corrosion protection in accordance with ZTV-ING applied to rust-free reinforcement steel with a purity grade of SA 2½ after sandblasting to DIN EN ISO 12 944-4.

• For indoor use.
• For walls and overhead application.
• For smoothing butt joints and holes in plasterboards and gypsum fibre boards.
• For smoothing work in accordance with quality class Q1 - Q4*.
• For smoothing joints in concrete filigree ceilings.
• Fairing coat for brickwork, concrete, aerated concrete and light-weight building boards for producing even surfaces before wallpapering and painting.
• For filling cracks, holes, joints and grooves.
• For gluing plasterboards and gypsum fibre boards, also with styrofoam lamination.
• For fixing gypsum blocks.
• For electrical installations to be fixed and smoothed.
  *according to leaflet: "Verspachteln von Gipsplatten: Klassifizierung der Oberflächenqualitäten" (smoothing of plasterboards: classification of surface qualities) issued by Eurogypsum.

• For indoor and outdoor use.
• Corrosion protection of reinforcement steel in concrete repair.
• Expected heavy contamination by chloride.
• In case of insufficient coverage of concrete.
• Immediate protection of reinforcement steel after sandblasting.
• Bonding slurry for subsequent repair mortars.

• For indoor and outdoor use.
• For wall and overhead application.
• For repair of honeycombs, filling of voids.
• For resurfacing brickwork and render.
• As fairing coat on concrete, fair-faced concrete and aerated concrete.
• For leveling irregular wall surfaces prior to laying tiles and flagstones.
• As leveling compound in swimming pools.
• Fairing coat after concrete repair with PCI Peciment 50 at vertical fair-faced concrete surfaces not exposed to foot traffic in civil engineering and bridge construction to ZTV-ING for PCC II application: surfaces not exposed to vehicular traffic and subject to dynamical loads (e.g. bridge soffits).
• As fairing coat for OS 4 or OS 5a coatings in accordance with DAfStb.
• For layer thickness from 1 to 10 mm.

• For indoor and outdoor use.
• For floors, walls and overhead application.
• Repair of corners and edges in concrete structures.
• For filling spalled areas and holes in screeds, concrete ceilings, concrete supports and balcony slabs.
• For filling duct slits in concrete walls, voids between concrete and steel frames a.o.
• For levelling irregular concrete substrates in swimming pools.
• For levelling brickwork.
• For levelling treads.
• For reprofiling works.
• For use as a leveller for covings.
• For use as a flat-surface leveller.
• Layer thickness:
  flat surface repairs 3 - 30 mm
  spot repairs 3 - 100 mm

• For indoor and outdoor use.
• For floors, walls and overhead application.
• For repair of surfaces and rough edges of concrete elements.
• For reprofiling work.
• For flat-surface repair of concrete elements.
• For leveling irregular concrete substrates in swimming pools.
• For balcony slabs, architrave of doors and windows, and horizontal beams in residential and industrial buildings.
• For leveling treads.
• Layer thickness 3 - 50 mm.

• For indoor and outdoor use.
• For large-area structural repairs using formwork and grouting method.
• High-strength, flowable repair mortar for structural repairs in construction above and below ground.
• For columns, cross beams and piers of all types of bridges.
• For cooling towers, chimneys and other industrial facilities.
• For water and wastewater treatment plants, tunnels, channels and below-ground construction.
• For buildings in proximity to the sea or waters.
• For layer thickness from 20 - 200 mm.

• For indoor and outdoor use.
• For floors, walls and overhead application.
• Sprayable repair mortar for concrete elements.
• Coating mortar for wastewater treatment plants, sewage plants, tunnels, sewers and below-ground construction.
• For filling spallings and holes in screeds, concrete ceilings, concrete supports and balcony slabs.
• For filling duct slits in concrete walls, voids between concrete and steel frames a.o.
• For reinforced steel construction in industrial and residential areas.
• For leveling treads.
• For reworking full-surface concrete components.
• For leveling irregular concrete substrates in swimming pools.
• For layer thickness from 5 - 50 mm.

• For indoor and outdoor use.
• For floor, wall and overhead application.
• For low-temperature repairs, e.g. in underground parking lots and basements.
• For fast repair in combination with mobile scaffolding.
• Fast repair of edges and corners of concrete structures.
• Filling of spalled areas and holes in screeds, concrete ceilings, concrete supports and balcony slabs.
• For water / wastewater treatment plants, tunnels, channels and below-ground construction.
• For buildings in proximity to the sea or waters.
• For layer thickness from 5 - 50 mm.

• For indoor and outdoor use.
• For floors, walls and overhead application.
• Repair mortar and reprofiling mortar for structural repairs in structural and civil engineering as well as bridge construction.
• Reprofiling of chipping and spalling.
• Vertical and overhead application of structures subject to medium to heavy duty.
• For repair work in floor areas.
• For the preventive and later protection of concrete surfaces on bridges or comparable engineering structures.
• For layer thickness from 6 - 40 mm.

• For indoor and outdoor use.
• For walls and overhead application.
• Repair of honeycombs, filling voids (scrape fillers), repair of broken corners and edges at low layer thickness.
• For repair of render.
• As fast-curing thin-wall plaster on concrete, fair-faced concrete and aerated concrete, render.
• For levelling irregular wall surfaces before tiling.
• For layer thickness from 1 to 5 mm.

• For outdoor use.
• For walls and overhead application.
• Coloured coating of concrete components, particularly when exposed to areas where de-icing salt is spread, and for render facades.
• For protecting civil engineering structures and facades from water and pollution gases such as carbon dioxide, sulphur oxides, nitrogen oxides and chlorides.
• Bridging hairline cracks in components.

• For indoor and outdoor use.
• For the repair of concrete surfaces and cement screeds.
• Fast repair of surfaces exposed to traffic with high mechanical loads.
• Repair of runways at airports.
• Repair of bridge decks and roads.
• Repair work in cold storage houses.
• Floors in the food industry.
• Repair of floors in petrol stations.
• Repair of crane runways.
• For layer thickness from 8 to 30 mm.
• Components B for different temperature ranges:
  - Comp BF from -25°C to 0°C
  - Comp B from 0°C to +20°C

• For indoor and outdoor use.
• For concrete substrates.
• For repair of traffic areas and industrial surfaces, for fast-track application or at low temperatures.
• For casting large manhole frames in formwork.
• For bedding road crossing constructions.
• For heavy traffic.
• For tank roads.

• For indoor and outdoor use.
• For concrete substrates.
• As flowable patching repair mortar for industrial floors and traffic areas.
• For fast-track work or at low temperatures.
• For grouting manhole frames in formwork.
• For grouting pavement stones.
• For anchoring and fixing mounting parts for roads.

• For indoor and outdoor use.
• For concrete substrates.
• For horizontal and inclined repair surfaces, e.g. ramps, industrial floors and traffic areas.
• For fast-track application or at low temperatures.
• For bedding manhole frames.
• For bedding kerbstones and pavers.
• For repair of runways at airports.

• For indoor and outdoor use.
• For walls and floors.
• Repair of worn-down steps and spalled stair nosings.
• Filling break-outs and holes in screeds, concrete ceilings, supports and balcony slabs.
• Filling pipe grooves in concrete walls, cavities between concrete and steel door frames etc.
• For levelling steps.
• For reprofiling works.
• For forming covings.
• For layer thickness from 2 - 50 mm.

• For interior surfaces (e.g. in basement rooms).
• For exterior surfaces from ground level upwards.
• Refurbishing mortar for substrates with low, medium and high salinity.
• For producing dry wall surfaces in the case of rising damp and/or hygroscopic moisture in masonry (a damp-proof course is additionally required if moisture is rising).
• For the preventive protection of exterior foundation walls when exposed to spray water and de-icing salt.

• For walls in the interior and exterior.
• As bonding slurry for masonry and concrete.

• For indoor and outdoor use.
• Hydrophobic agent and impregnation in structural and civil engineering, road construction.
• For protecting concrete surfaces against weather influences, contamination and chloride ions.
• As diluting agent for the application on porous brick, sandlime brick and mineral plaster.
• Suitable for vertical and horizontal concrete surfaces.

• For indoor and outdoor use.
• For walls and floors.
• Impregnation for concrete and reinforced concrete.
• Moisture protection for vertical and sloped surfaces exposed to weather conditions, e.g. facades, walls, retaining walls etc.
• Primer on cement-based substrates for the surface protection systems.
• Surface protection against freeze/thaw resistance.

• For indoor and outdoor use.
• For walls.
• For concrete.
• For lime sandstone, sandstone and clinker brickwork.
• For rough surfaces made of brick, marble or granite.
• Protecting absorbent, mineral building material and polished, smooth mineral substrates against water ingress and/or adhesion of dirt on the surface.

• For indoor and outdoor use.
• For walls.
• Protects natural stone, sandstone, concrete, brick, plaster/render, fibrous cement and well bonding coatings against graffiti.

• For indoor and outdoor use.
• For walls.
• Impregnation of facades and structural elements made of concrete, aerated concrete, brickwork, render and lime plaster, natural and artificial stone, absorbent clinker and roof tiles.
• Impregnation of chimney stacks.
• Hydrophobic treatment of historical monuments made of sandstone and other natural stones, bricks etc.