Laying parquetry with professional products

• For reinforcing and increasing the tensile strength of suitable cementitious PCI floor levelers to produce a composite leveler in layer thicknesses from 5 mm
  - on substrates with existing cracks and dummy joints
  - on substrates sensitive to forming cracks and mixed substrates
  - on substrates slightly vibrating or sensitive to vibrations (e.g. wooden floorboard constructions).
  PCI Armiermatte GFM:
• Suitable for substrates with cracks up to a width of approx. 3 mm and minor movement to be expected.
  PCI Armiermatte GFS:
• In addition to PCI Armiermatte GFM for cracks from 3 mm to 5 mm and major movement to be expected.

• For reinforcing and increasing the tensile strength of suitable cementitious PCI floor levelers to produce a composite leveler in layer thicknesses from 5 mm
  - on substrates with existing cracks and dummy joints
  - on substrates sensitive to forming cracks and mixed substrates
  - on substrates slightly vibrating or sensitive to vibrations (e.g. wooden floorboard constructions).
  PCI Armiermatte GFM:
• Suitable for substrates with cracks up to a width of approx. 3 mm and minor movement to be expected.
  PCI Armiermatte GFS:
• In addition to PCI Armiermatte GFM for cracks from 3 mm to 5 mm and major movement to be expected.

• For indoor and outdoor use.
• For absorbent and low-absorbent concrete and screed substrates.
• As special primer for PCI Zemtec 1K, PCI Zemtec 180, PCI Periplan, PCI Periplan Extra, PCI Periplan Plus and PCI Periplan Multi.
• As special primer for anhydrite screeds, mastic asphalt screeds, magnesite screeds as well as heated constructions for floor levelers and tile adhesives. 
• As special primer for wooden floorboards, particle boards as well as OSB boards.
• As special primer for non-absorbent substrates such as ceramic tiles for subsequent floor leveling compounds and tile adhesives.
• Suitable for the use on ships; meets the requirements of Marine Equipment Directive (MED) 96/98/EC.

• For indoor use.
• Cementitious leveller for smoothing and levelling floors prior to the installation of
  - textile flooring and resilient flooring,
  - parquet flooring or laminate flooring to be glued.
• For producing smooth and level surfaces.
• For levelling
  - wooden floors
  - particle boards
  - OSB boards.
• Suitable for levelling concrete floors, cement screeds, calcium sulphate screeds, magnesite screeds, mastic asphalt screeds as well as ceramic tiles or coatings.
• Suitable as filler and performance grout for warm water underfloor heating system recommended for a thin-layer bedding.
• For layer thickness from 3 to 60 mm.
• Suitable for
  - underfloor heating
  - exposure to chair castors.

• Dispersion adhesive for floors in the interior.
• For gluing
  ‑ textile flooring (tufted and woven wall-to-wall carpet and fibre bonded carpet)
  ‑ CV flooring
  ‑ PVC flooring (rolls and tiles)
  - PVC coated cork tiles
  - linoleum flooring in rolls; cork linoleum
  ‑ PCI sound reducing underlays.
• Suitable for underfloor heating.
• Suitable for exposure to chair castors to DIN EN 12529.
• Suitable for cleaning by wet shampooing and spray extraction.

• SMP parquet adhesive for interior floors.
• For gluing
  - on-edge strip parquet flooring to EN 14761
  - mosaic parquet elements to EN 13488
  - multi-layer parquet flooring to EN 13489 (two-layer parquet floorboards up to max. 120 cm, three-layer parquet floorboards up to max. 250 cm)
  - laminate flooring.
• Suitable for underfloor heating.

• For floors in the interior.
• For gluing
  - on-edge strip parquet to EN 14761
  - solid wood parquet elements to EN 13226
  - solid wood overlay flooring elements to EN 13228
  - mosaic parquet elements to EN 13488
  - multi-layer parquet elements to EN 13 489
  - laminate flooring
  - wood blocks RE (for use e.g. in administrative buildings, hobby rooms and in residential areas)
  - wood blocks WE (for use e.g. in workrooms and rooms with similar wear without extreme climate fluctuation and exposure to vehicles and forklifts except for light loads)
  - exotic wood, e.g. bamboo.
• Suitable for underfloor heating.
• Suitable for gluing PCI DU 903 FH sound reducing underlay.
• Suitable for gluing PCI Pecilastic W flexible waterproofing membrane, PCI Pecitape 120 special waterproofing tape as well as PCI Pecitape 90° I prefabricated internal corner element and PCI Pecitape 90° A prefabricated external corner element as waterproof layer under parquet flooring in private bathrooms (moisture resistance class A0).
• Suitable for gluing 2-layer and 3-layer parquet elements with tongue and groove on calcium sulphate flowable screeds from CASEA GmbH and Knauf Gips KG already at a residual moisture level smaller 1.5% (measured with CM meter). Suitable for use within the system with PCI Pecilastic U waterproofing and isolating membrane. The parquet elements must be approved by the parquet manufacturer for full-surface gluing.

• Dispersion adhesive for floors in the interior. 
• For gluing
  - PVC design flooring,
  - PVC flooring in rolls and tiles,
  - CV flooring,
  - natural rubber flooring up to a thickness of 2 mm. 
• Suitable for underfloor heating.
• Suitable for exposure to chair castors to DIN EN 12529.

• For indoor use.
• On concrete floors, floating screeds or screeds on an isolating layer, wooden floorboards and particle boards, old ceramic tiles and natural stones.
• For the transition area floor/wall to prevent sound transmission when applying flowable floor levellers (e.g. PCI Periplan, PCI Periplan Fein), non-sag fairing coats and tile adhesives (e.g. PCI Flexmörtel, PCI Nanolight, PCI Nanoflott light) or parquet or flooring adhesives to all suitable substrates.
• For preventing three-sided adhesion at elastic edge joints.
• Especially for renovation works.

• For indoor use.
• For producing smooth and level surfaces.
• For leveling
  - wooden floors,
  - OSB boards,
  - particle boards,
  - mineral substrates,
  - non absorbent substrates,
  - mastic asphalt.
• Prior to laying
  - ceramic tiles and natural stones,
  - textile and resilient floorings,
  - parquet or laminate flooring to be glued.
• For layer thickness from 3 to 60 mm.
• Suitable for warm water underfloor heating recommended for a thin-layer bedding.

• For indoor use.
• For dry areas.
• For interiors under a waterproofing layer bonded under tiles and slabs up to water exposure class W3-I according to DIN 18534.
• For residential and commercial construction.
• For leveling and surface repair of rough, irregular concrete floors, cement screeds, calcium sulfate screeds and mastic asphalt screeds as well as ceramic coverings.
• For leveling under tiles and natural stones.
• For leveling under textile floorings and elastic floorings such as PVC, linoleum etc.
• For leveling under laminate or parquet flooring.
• For layer thickness from 1 - 20 mm*.
• On mastic asphalt screeds up to 5 mm.

*also higher depending on site

• For indoor use.
• Prior to the installation of
  - textile flooring and resilient flooring
  - parquet flooring or laminate flooring to be bonded.
• Cementitious fairing coat for leveling hollows, holes, irregular substrates and for producing inclined surfaces on
  - cementitious substrates
  - calcium sulfate screeds
  - magnesite screeds
  - mastic asphalt screeds
  - particle boards
  - wooden floors
  - ceramic tiles
  - coatings.
• For repairing treads and risers.
• For layer thickness from 0.5 to 50 mm.
• Suitable for
  - underfloor heating
  - exposure to chair castors (from 1 mm minimum layer thickness).
• Suitable as filling base coat on timber floors, particle boards and ceramic tiles when adding PCI VG 2 multi-use primer during the mixing process.

• Dispersion adhesive for floors in the interior.
• For gluing
  - textile flooring with textile backing,
  - textile flooring with jute backing,
  - textile flooring with latex foam backing or latex coat,
  - textile flooring with PU foam backing,
  - textile flooring with synthetic secondary backing,
  - fibre bonded carpet,
  - woven textile flooring,
  - PCI sound reducing underlay.
• Suitable for underfloor heating.
• Suitable for exposure to chair castors to DIN EN 12529.
• Suitable for cleaning by wet shampooing and spray extraction (after 7 days).

• Dispersion adhesive for floors in the interior.
• For bonding
  - textile flooring (tufted and woven) 
  - light-weight fiber bonded carpet
  - PVC design flooring
  - heterogeneous and homogeneous PVC flooring
  - CV flooring 
  - quartz vinyl coverings 
  - linoleum flooring 
  - natural rubber flooring with smooth, sanded backing up to a thickness of 4 mm
  - PCI/THOMSIT sound reducing underlays on absorbent substrates ready to take further coverings.
• Suitable for underfloor heating.
• Suitable for exposure to chair castors to DIN EN 12529.
• Suitable for cleaning by wet shampooing and spray extraction.

• For indoor use.
• Cementitious leveller for smoothing and levelling floors prior to the installation of
  - textile flooring and resilient flooring,
  - parquet flooring or laminate flooring to be glued.
• For producing smooth and level surfaces.
• For levelling
  - cementitious substrates
  - calcium sulphate screeds
  - magnesite screeds
  - mastic asphalt screeds
  - non-absorbent substrates.
• For layer thickness from 0.5 to 15 mm; for parquet flooring or laminate flooring to be glued from 2 to 15 mm; on mastic asphalt screeds from 2 to 5 mm.
• Suitable for
  - underfloor heating
  - exposure to chair castors at a layer thickness of min. 1 mm.

• For indoor use.
• Cementitious leveler for smoothing and leveling floors prior to the installation of
  - textile flooring and resilient flooring,
  - parquet flooring or laminate flooring to be bonded.
• For producing smooth and level surfaces.
• For leveling
  - cementitious substrates
  - calcium sulfate screeds
  - magnesite screeds
  - mastic asphalt screeds
  - non-absorbent substrates.
• For layer thickness from 0.5 to 40 mm; for parquet flooring or laminate flooring to be bonded from 2 to 40 mm; on mastic asphalt screeds from 2 to 5 mm.
  It is possible to blend PCI USP 32 S with silica sand when layer thickness exceeds 20 mm, but it is not necessary.
• Suitable for
  - underfloor heating
  - exposure to chair castors at a layer thickness of min. 1 mm.
• Suitable for the use on ships; meets the requirements of Marine Equipment Directive (MED) 96/98/EC.

• Dispersion primer for floors in the interior.
• For priming prior to the application of floor levelers and fairing coats, also when subsequently bonding parquet flooring.
• For priming on
  - absorbent substrates such as cement screed, calcium sulfate screed or magnesite screed
  - mastic asphalt screed
  - non-absorbent substrates such as tiles and coatings
  - Terrazzo floors
  - particle boards, OSB boards and wooden floorboards
  - substrates with waterproof residues from dispersion adhesives and reaction resin adhesives.
• Suitable as filling base coat on wooden floorboards, particle boards and ceramic tiles after adding it to PCI STL 39 non-sag fairing coat.
• Suitable for the use on ships; meets the requirements of the Marine Equipment Directive (MED) 96/98/EC.

• Polyurethane primer for floors in the interior.
• For priming prior to the application of floor levellers/fairing coats and subsequently gluing parquet flooring.
• For priming on substrates with residues of dispersion adhesive, reaction resin adhesive, water-soluble adhesive (e.g. sulphite liquor adhesives) and bituminous adhesive.
• Wash primer with case-hardening effect on absorbent substrates such as cement screed, calcium sulphate screed and magnesite screed.
• For priming on non-absorbent substrates.