PCI Novoment® M1 plus

for fast-curing cement screeds

fields of application

• For indoor and outdoor use.
• Suitable for direct use.
• For areas exposed to permanent wetness.
• For fast-curing bonded screeds and screeds installed on an isolating layer or insulation layer.
• Suitable for heated screeds.
• As repair mortar for quick repairs of industrial floors.
• For layer thickness from 20 to 120 mm.
• Very low emissions, GEV-EMICODE EC1 PLUS.

features and benefits

• Can be tiled after approx. 1 day, walkable after approx. 3 hours.
• Ready-mixed mortar, therefore no on-site mixing with sand required.
• Extended processing time, can be worked with and smoothed for almost 1 hour despite of short curing time.
• Temperature resistant from -30°C to +80°C, therefore suitable for balconies, terraces, garages, industrial floor coverings cleaned with superheated steam.
• Insensitive to moisture, therefore suitable for areas exposed to permanent wetness.
• Limited bending (suitability test to 6.2 DIN 18560-2), therefore reduction of layer thickness possible to 30 mm for screeds on an insulation layer according to chart 1 (perpendicular load capacity ≤ 2 kN/m²) or chart 2 (perpendicular load capacity, area load ≤ 3 kN/m²), in case of heated screeds the pipes must be covered by a layer thickness of 30 mm.

• EMICODE: EC1 PLUS