Ship outfitting

Ship outfitting is a challenging field for specialists: On the one hand products with very special requirements are necessary to meet the particular conditions for the application on a ship (e.g. torsion of the hull, vibrations, salt water). On the other hand there are a series of specifications and regulations to be followed, and quite often test certificates are required to prove the suitability of the products. For many years PCI Augsburg GmbH has produced products for the preparation of substrates and the laying of ceramic tiles in harmony with ship outfitting and meeting the requirements of the MED (Marine Equipment Directive).

Product group

Product sub-group

Technical data sheet

PCI Carraferm®

Silicone joint sealant for natural stones

Technical data sheet

PCI Carraflex®

Flexible thin-bed mortar for natural stones

Technical data sheet

PCI Durafug® NT

Cementitious joint grout for commercially used areas, swimming pools and potable water reservoirs

Technical data sheet

PCI Durapox® NT

Reaction resin binder for laying and grouting ceramic coverings exposed to chemicals

Technical data sheet

PCI Durapox® NT plus

Reaction resin mortar for laying and grouting of ceramic coverings exposed to chemicals

Technical data sheet

PCI Durapox® Premium

Epoxy resin mortar for laying and grouting ceramic coverings

Technical data sheet

PCI Durapox® Premium Multicolor

Epoxy resin mortar for laying and grouting ceramic coverings

Technical data sheet

PCI Epoxigrund 390

Special primer on absorbent and non-absorbent substrates

Technical data sheet

PCI Epoxigrund Rapid

Special primer on absorbent and non-absorbent substrates

Technical data sheet

PCI Flexmörtel® S2

Highly flexible tile adhesive for all ceramic coverings

Technical data sheet

PCI Gisogrund® 404

Wash primer for absorbent and non-absorbent substrates

Technical data sheet

PCI Nanofug® Premium

Multi-use flexible joint grout for all tiles and natural stones

Technical data sheet

PCI Nanolight®

Multi-use light, flexible adhesive for all kinds of substrates and ceramic coverings

Technical data sheet

PCI Novoment® Light

Ready-mixed, light screed mortar for cement screeds with low dead weight

Technical data sheet

PCI Novoment® M1 plus

Ready-mixed, fast-setting screed mortar for fast-curing cement screeds

Technical data sheet

PCI Novoment® M3 plus

Ready-mixed, fast-setting screed mortar for fast track cement screeds

Technical data sheet

PCI Novoment® Z1

Fast-setting screed cement for fast track screeds

Technical data sheet

PCI Periplan® Extra

Leveling compound for critical substrates under top coverings

Technical data sheet

PCI STL 39

Non-sag fairing coat light

Technical data sheet

PCI Seccoral® 1K

Flexible waterproofing slurry under ceramic coverings on balconies, terraces, in shower facilities

Technical data sheet

PCI UKL 302

Multi-use flooring adhesive

PCI Carraferm®

Silicone joint sealant for natural stones

For indoor and outdoor use.
For walls and floors.
For stain-free sealing of construction joints and movement joints between materials made of natural stone such as marble, Solnhofen stone, travertine, granite, etc.
For stain-free sealing of construction joints and movement joints between materials made of natural stone and concrete, glass, wood, metal, ceramic, sanitary acrylic, PVC and other synthetic material.
For all living areas, bathrooms, showers, toilet and kitchen; for balconies and terraces.
PCI Carraferm transparent is well suited to fix bathroom mirrors.

Technical data sheet

Safety data sheet

Declaration of performance EN 15651-3 (S)

PCI Carraflex®

Flexible thin-bed mortar for natural stones

For indoor and outdoor use.
For walls and floors.
For laying calibrated natural stones, especially white marble (e.g. Bianco-Carrara, Ajax, Arabescato) as well as Solnhofen stone and Jura marble in a thin adheisve bed.
On cement screed, rough-ground anhydrite screed, gypsum-based floated screed, concrete and precast concrete elements, aerated concrete, heated screed, plasterboards, gypsum fibre boards, dry screed, insulation boards, plaster slabs, plaster and old wall tiles and floor tiles.
For residential areas and business areas, basements, attics, hallways, kitchens, bathrooms, lavatories, staircases and base courses of buildings.
For ceramic tiles, flagstones and fully vitrified tiles if a white and polymer modified adhesive bed is required.

Technical data sheet

Safety data sheet

Declaration of performance EN 12004 (C2FT S1)

PCI Durafug® NT

Cementitious joint grout for commercially used areas, swimming pools and potable water reservoirs

For indoor and outdoor use.
For walls and floors.
For joint width from 3 - 20 mm for colours 31 Cement grey and 22 Sand grey. For joint width from 1 - 8 mm for colours 16 Silver grey and 20 White.
For grouting coverings of fully vitrified tiles, vitrified tiles and floor clinker slabs exposed to increased mechanical stress caused by chemicals used for cleaning in industrial and commercially used areas.
Colours 20 White and 16 Silver grey, 1 - 8 mm joint width, also for glass mosaic, glass tiles and porcelain mosaic.
For grouting tile coverings in workshops, swimming pools, canteen kitchens, cold storage depots, washing facilities, storage, sales and exhibition rooms.

Technical data sheet

Safety data sheet

PCI Durapox® NT

Reaction resin binder for laying and grouting ceramic coverings exposed to chemicals

For indoor and outdoor use.
For walls and floors.
For chemical-resistant and water-impermeable laying and grouting of wall and floor coverings made of ceramic tiles, flagstones, mosaic as well as clinker bricks on renders, cement screed and concrete.
For ceramic coverings in breweries, dairies, soft drink industries, industrial kitchens, butcheries, slaughter houses, fat processing industries, battery rooms, galvanisation, dye works, bleaching works, tanneries, papermills, laboratories and hospitals.
For laying and grouting of ceramic tiles in swimming pools, hot springs, baths in hospitals as well as for ceramic tiles in shower facilities or spa areas.
For ceramic tiles in administration buildings, hotels, schools, toilets, sewage plants, sewers, cattle stablings and for stairs exposed to de-icing salt.

Technical data sheet

Declaration of performance EN 12004 (R2T)

PCI Durapox® NT plus

Reaction resin mortar for laying and grouting of ceramic coverings exposed to chemicals

For indoor and outdoor use.
For walls and floors.
For chemical-resistant and water-impermeable laying and grouting of wall and floor coverings made of ceramic tiles, flagstones, mosaic as well as clinker bricks on renders, cement screed and concrete.
For ceramic coverings in breweries, dairies, soft drink industries, industrial kitchens, butcheries, slaughter houses, fat processing industries, battery rooms, galvanisation, dye works, bleaching works, tanneries, papermills, laboratories and hospitals.
For laying and grouting of ceramic tiles in swimming pools, hot springs, baths in hospitals as well as for ceramic tiles in shower facilities or spa areas.
For ceramic tiles in administration buildings, hotels, schools, toilets, sewage plants, sewers, cattle stablings and for stairs exposed to de-icing salt.

Technical data sheet

Safety data sheet

Declaration of performance EN 12004 (R2T)

PCI Durapox® Premium

Epoxy resin mortar for laying and grouting ceramic coverings

For indoor and outdoor use.
For walls and floors.
Especially for grouting surfaces with a high-quality visual appearance such as tiles, mosaic etc.
For chemical-resistant and water-impermeable laying and grouting of wall and floor coverings.
For ceramic coverings in breweries, dairies, soft drink industries, industrial kitchens etc.

Declaration of performance EN 12004 (R2T)

Safety data sheet

Technical data sheet

PCI Durapox® Premium Multicolor

Epoxy resin mortar for laying and grouting ceramic coverings

For indoor and outdoor use.
For walls and floors.
Especially for grouting surfaces with a high-quality visual appearance such as tiles, mosaic etc.
For chemical-resistant and water-impermeable laying and grouting of wall and floor coverings.
For ceramic coverings in breweries, dairies, soft drink industries, industrial kitchens etc.

Technical data sheet

Declaration of performance EN 12004 (R2T)

PCI Epoxigrund 390

Special primer on absorbent and non-absorbent substrates

For indoor and outdoor use.
For walls and floors.
Primer for PCI sealings and PCI coatings on cementitious substrates, mastic asphalt screeds, ceramic tiles, synthetic resin coatings and wooden substrates.
Primer for floors in the interior before applying floor levellers/fairing coats, also when subsequently gluing parquet flooring on
- concrete floors, cement screeds, calcium sulphate screeds, magnesite screeds
- mastic asphalt screeds
- ceramic tiles and synthetic resin coatings
- wooden substrates
- substrates with residues of dispersion, reaction resin, water soluble (e.g. spent sulphite liquor adhesive) and bitumen adhesives.
Suitable as leveller and/or fairing coat when mixed with silica sand.
As a binding agent for producing screeds, repair mortars and drain mortars based on epoxy resin.
Suitable for the use on ships; meets the requirements of Marine Equipment Directive (MED) 96/98/EC.

Technical data sheet

Safety data sheet

Declaration of performance EN 1504-2

PCI Epoxigrund Rapid

Special primer on absorbent and non-absorbent substrates

For indoor and outdoor use.
For walls and floors.
Primer for PCI sealings and PCI coatings on cementitious substrates, mastic asphalt screeds, ceramic tiles, synthetic resin coatings and wooden substrates.
Primer for floors in the interior before applying floor levellers/fairing coats, also when subsequently gluing parquet flooring on
- concrete floors, cement screeds, calcium sulphate screeds, magnesite screeds
- mastic asphalt screeds
- ceramic tiles and synthetic resin coatings
- wooden substrates
- substrates with residues of dispersion, reaction resin, water soluble (e.g. spent sulphite liquor adhesive) and bitumen adhesives.
Suitable as leveller and/or fairing coat when mixed with silica sand.
As a binding agent for producing screeds, repair mortars and drain mortars based on epoxy resin.
Suitable for the use on ships; meets the requirements of Marine Equipment Directive (MED) 96/98/EC.

Technical data sheet

Safety data sheet

Declaration of performance EN 1504-2

PCI Flexmörtel® S2

Highly flexible tile adhesive for all ceramic coverings

For indoor and outdoor use.
For walls and floors.
For laying cement screeds/heated cement screeds older ≥ 3 days (as soon as walkable).*
Especially for laying large-format flagstones on heated screeds.
For laying ceramic tiles and flagstones, porcelain mosaic, clinker tiles, clinkers and fully vitrified tiles.
For laying tiles in swimming pools, pool surrounds, wet rooms and cold storage depots.
On rough-ground anhydrite screed, gypsum based floated screed, precast concrete elements, aerated concrete, heated screed, plasterboards, gypsum fiber boards, dry screed, mastic asphalt (only indoors), insulation boards, plaster slabs, plaster and on existing wall and floor tiles.
For laying ceramic on PCI bonded waterproofing layers and PCI isolation layers.
For the repair of irregular walls and floors prior to laying tiles and flagstones.

Safety data sheet

Technical data sheet

Declaration of performance EN 12004 (C2TE S2)

PCI Gisogrund® 404

Wash primer for absorbent and non-absorbent substrates

For indoor and outdoor use.
For absorbent and low-absorbent concrete and screed substrates.
As special primer for PCI Zemtec 1K, PCI Zemtec 180, PCI Periplan, PCI Periplan Extra, PCI Periplan Plus and PCI Periplan Multi.
As special primer for anhydrite screeds, mastic asphalt screeds, magnesite screeds as well as heated constructions for floor levelers and tile adhesives.
As special primer for wooden floorboards, particle boards as well as OSB boards.
As special primer for non-absorbent substrates such as ceramic tiles for subsequent floor leveling compounds and tile adhesives.
Suitable for the use on ships; meets the requirements of Marine Equipment Directive (MED) 96/98/EC.

Technical data sheet

Safety data sheet

PCI Nanofug® Premium

Multi-use flexible joint grout for all tiles and natural stones

For indoor and outdoor use.
For walls and floors.
For joint width from 1 - 10 mm.
For all ceramic tiles, glass mosaic and glass tiles.
For all natural stones.
In residential areas, bathrooms, showers, on balconies, terraces, facades, in public and commercial areas exposed to frequent wetness, e.g. shower facilities, saunas, toilets. In showrooms and presentation areas.
On heated screeds, dry screeds, precast concrete elements, plasterboards, gypsum blocks, particle boards, wooden floorboards and areas subject to extreme variations in temperature.

Safety data sheet

Technical data sheet

PCI Nanolight®

Multi-use light, flexible adhesive for all kinds of substrates and ceramic coverings

For indoor and outdoor use.
For walls and floors.
For all substrates: cement screed, rough-ground anhydrite screed, gypsum-based floating screed, concrete, precast concrete elements, aerated concrete, heated screed, plasterboards, gypsum fiber boards, dry screed, magnesite screed, mastic asphalt (only indoors), insulation boards, gypsum blocks, plaster, render, gauged render, brickwork, old ceramic coverings etc., metal substrates (only indoors), firmly adhering PVC coverings.
For all ceramic coverings laid in a thin bed or medium bed: non-vitrified tiles, vitrified tiles, fully-vitrified tiles, porcelain mosaic, glass mosaic, glass tiles, brick tiles and terracotta.
For laying tiles and flagstones on PCI PowerBoard HR foam supporting elements, PCI Polysilent impact sound insulation and isolation board as well as PCI Pecilastic isolating fabric underlay.
For laying tiles and flagstones on PCI Lastogum bonded waterproofing (e.g. private bathrooms), PCI Seccoral (e.g. swimming pool and terraces) or PCI Apoflex (e.g. industrial kitchens).
For repairing and leveling irregular wall surfaces and floor surfaces (e.g. brickwork, render, screed) before laying tiles.

Technical data sheet

Declaration of performance EN 12004 (C2TE S1)

PCI Novoment® Light

Ready-mixed, light screed mortar for cement screeds with low dead weight

For indoor and outdoor use.
For areas exposed to permanent wetness.
For light bonded screeds and screeds installed on an isolating or insulating layer.
Light mortar for refurbishment of concrete floors and cement screeds.
For layer thickness from 20 to 80 mm.
Very low emissions, GEV-EMICODE EC 1 PLUS.

Declaration of performance EN 13813 (CT-C20-F4)

Safety data sheet

Technical data sheet

PCI Novoment® M1 plus

Ready-mixed, fast-setting screed mortar for fast-curing cement screeds

For indoor and outdoor use.
Suitable for direct use.
For areas exposed to permanent wetness.
For fast-curing bonded screeds and screeds installed on an isolating layer or insulation layer.
Suitable for heated screeds.
As repair mortar for quick repairs of industrial floors.
For layer thickness from 20 to 120 mm.
Very low emissions, GEV-EMICODE EC1 PLUS.

Technical data sheet

Safety data sheet

Declaration of performance EN 13813 (CT-C60-F7-A12)

PCI Novoment® M3 plus

Ready-mixed, fast-setting screed mortar for fast track cement screeds

For indoor and outdoor use, also for direct use.
For areas exposed to permanent wetness.
For fast track bonded screeds and screeds installed on an isolating or insulating layer.
Suitable for heated screeds.
As repair mortar for concrete floors and cementitious screeds.
For layer thickness from 20 to 80 mm.

Technical data sheet

Safety data sheet

Declaration of performance EN 13813 (CT-C25-F4-A12)

PCI Novoment® Z1

Fast-setting screed cement for fast track screeds

For indoor and outdoor use.
For producing fast track
- screeds on an isolating layer or insulating layer
- bonded screeds.
Suitable for heated screeds.

Technical data sheet

Safety data sheet

PCI Periplan® Extra

Leveling compound for critical substrates under top coverings

For indoor use.
For producing smooth and level surfaces.
For leveling
- wooden floors,
- OSB boards,
- particle boards,
- mineral substrates,
- non absorbent substrates,
- mastic asphalt.
Prior to laying
- ceramic tiles and natural stones,
- textile and resilient floorings,
- parquet or laminate flooring to be glued.
For layer thickness from 3 to 60 mm.
Suitable for warm water underfloor heating recommended for a thin-layer bedding.

Technical data sheet

Safety data sheet

Declaration of performance EN 13813 (CT-C25-F6)

PCI STL 39

Non-sag fairing coat light

For indoor use.
Prior to the installation of
- textile flooring and resilient flooring
- parquet flooring or laminate flooring to be bonded.
Cementitious fairing coat for leveling hollows, holes, irregular substrates and for producing inclined surfaces on
- cementitious substrates
- calcium sulfate screeds
- magnesite screeds
- mastic asphalt screeds
- particle boards
- wooden floors
- ceramic tiles
- coatings.
For repairing treads and risers.
For layer thickness from 0.5 to 50 mm.
Suitable for
- underfloor heating
- exposure to chair castors (from 1 mm minimum layer thickness).
Suitable as filling base coat on timber floors, particle boards and ceramic tiles when adding PCI VG 2 multi-use primer during the mixing process.

Technical data sheet

Safety data sheet

Declaration of performance EN 13813 (CT-C20-F6)

PCI Seccoral® 1K

Flexible waterproofing slurry under ceramic coverings on balconies, terraces, in shower facilities

For indoor and outdoor use.
For walls and floors.
For flexible waterproofing under tiles at cantilever balconies, on terraces, in shower facilities.
For waterproofing solid non-drinking water tanks or swimming pools up to a depth of water of 8 meters.
Suitable for water exposure classes W0-I, W1-I, W2-I, W3-I in accordance with DIN 18534; DIN 18531-5 (e.g. balconies etc.); DIN 18533 (building elements in contact with soil); DIN 18535 (swimming pools and tanks).
For waterproofing in accordance with the Austrian Standard B 3407 exposure classes W1 - W6; in W5 without increased chemical exposure.
For bonding PCI Pecilastic W waterproofing membrane.
For sealing butt joints and connections of the waterproofing membrane PCI Pecilastic W/U.
Can take mechanical loads up to use class III in accordance with the ZDB code of practice "Hoch belastete Beläge" (coverings subject to heavy duty exposure).

Technical data sheet

Safety data sheet

Declaration of performance EN 14891 (CM O1P)

PCI UKL 302

Multi-use flooring adhesive

Dispersion adhesive for floors in the interior.
For bonding
- textile flooring (tufted and woven)
- light-weight fiber bonded carpet
- PVC design flooring
- heterogeneous and homogeneous PVC flooring
- CV flooring
- quartz vinyl coverings
- linoleum flooring
- natural rubber flooring with smooth, sanded backing up to a thickness of 4 mm
- PCI/THOMSIT sound reducing underlays on absorbent substrates ready to take further coverings.
Suitable for underfloor heating.
Suitable for exposure to chair castors to DIN EN 12529.
Suitable for cleaning by wet shampooing and spray extraction.

Technical data sheet

Safety data sheet

Top search terms

Most popular products

PCI Flexmörtel® S1

for all ceramic coverings

Technical data sheet

PCI Nanofug® Premium

for all tiles and natural stones

Technical data sheet

PCI Pericret®

for floors, walls and overhead application

Technical data sheet

PCI Barraseal® Turbo

for external basement walls, foundations and concrete elements

Technical data sheet

PCI Novoment® M1 plus

for fast-curing cement screeds

Technical data sheet

PCI BT 21

Cold-applied, self-adhesive membrane for the reliable waterproofing of buildings, down to –5 °C

Technical data sheet

Most popular product systems

System for Multi-Use Tiling

Versatile, very low-emission tiling system... More