Joint sponge, anchor mixer etc. – PCI tools and accessories

Depending on the product, a variety of tools and accessories are needed for processing construction materials. The experts from PCI develop and produce these tools and accessories in line with practical requirements. The range includes tools such as plastic nozzles and empty cartridges as well as joint sponges for cleaning freshly grouted tiles and an anchor mixer for mixing bitumen coatings.

The anchor mixer is especially recommended for mixing PCI Pecimor® thick bitumen coatings and other viscous materials. The shape of the anchor is designed to insure gentle mixing and homogenization of the project. The result is a creamy mixture without lumps or material accumulations which is very easy to apply. This effect is produced by the strong vacuum generated by the anchor mixer in operation.

Grouting tiles with a cementitious joint grout

The grouting of tiles calls for considerable experience and the right tools to achieve the optimum results. Using a PCI Gummifugscheibe rubber grouting float, it is much easier to grout ceramic tiling them with a conventional foam rubber grout float. This float, which was originally designed for grouting with considerably more compact reaction resin mortars, can achieve very high filling levels with additional grout application.

With the PCI rubber grouting float, grout can already be applied flush with the joints in the first grouting stage. This approach leaves considerably less mortar residue on tile surfaces, significantly reducing the need for subsequent cleaning by means of the joint sponge PCI Fugen-Schwamm.

By submitting the contact form, you agree that your data will be used to process your request. You can revoke your consent at any time by sending an e-mail to You can find further information and revocation instructions in the data protection declaration.
* mandatory field

Essential site accessories for tilers: epoxy and joint sponges

Epoxy resin joint grouts are the material of choice for grouting highly stressed tiled areas in swimming pools, laboratories and commercial facilities. These grouts resist chemical attack by water and the detergents usually used but they do require special attention to processing.

The tiling should be washed several times following grouting. In the first washing stage, material residues are loosened and absorbed by the PCI Epoxi-Schwamm hart hard epoxy sponge. In the second and third washing stages, the epoxy resin residue is removed from the tiles. Ceramic tiling which has been grouted using cementitious materials also needs to be cleaned using a moistened PCI joint sponge. Excess material is washed out of the joints as gently as possible. Use PCI products to make everyday work on construction sites easier.

Top search terms

    Most popular products

    PCI Nanofug® Premium

    for all tiles and natural stones

    Technical data sheet

    PCI Pericret®

    for floors, walls and overhead application

    Technical data sheet

    PCI Barraseal® Turbo

    for external basement walls, foundations and concrete elements

    Technical data sheet

    PCI Novoment® M1 plus

    for fast-curing cement screeds

    Technical data sheet

    PCI BT 21

    Cold-applied, self-adhesive membrane for the reliable waterproofing of buildings, down to –5 °C

    Technical data sheet

    Most popular product systems

    System for Multi-Use Tiling

    Versatile, very low-emission tiling system...  More