PCI: low-pollutant construction materials for grouting and waterproofing
Work on screeds ranges from crack injection and leveling to priming for subsequent flooring work. With PCI, you have a competent partner who can provide support for the selection of tools and materials. To seal cracks in screeds, use injection resins such as the low emission silicate cast resin PCI Apogel® SH and protect both personnel and the environment.
If you need to even out irregularities in walls and floors, we recommend environmentally compatible floor and wall leveling compounds such as PCI Pericret® and PCI Periplan®. For priming, our range includes a variety of low-emission materials. While PCI Epoxigrund seals pores, providing a watertight moisture barrier, PCI Gisogrund® is used as an adhesion-enhancing protective primer.
PCI Apogel® SH
Silicate cast resin for casting cracks in screeds
PCI Carraferm®
Silicone joint sealant for natural stones
PCI Carraflex®
Flexible thin-bed mortar for natural stones
PCI Carrafug®
Special joint grout for natural stone slabs
PCI Carrament® grey
Medium-bed mortar for natural stones and fully-vitrified coverings
PCI Carrament® grey
Medium-bed mortar for natural stones and fully-vitrified coverings
PCI Carrament® white
Medium-bed mortar for natural stones and fully-vitrified coverings
PCI Carrament® white
Medium-bed mortar for natural stones and fully-vitrified coverings
PCI Durafug® NT
Cementitious joint grout for commercially used areas, swimming pools and potable water reservoirs
PCI Durafug® NT
Cementitious joint grout for commercially used areas, swimming pools and potable water reservoirs
PCI Epoxigrund 390
Special primer on absorbent and non-absorbent substrates
PCI Epoxigrund 390
Special primer on absorbent and non-absorbent substrates
PCI Epoxigrund Rapid
Special primer on absorbent and non-absorbent substrates
PCI Epoxigrund Rapid
Special primer on absorbent and non-absorbent substrates
PCI FT® Extra
Polymer modified tile adhesive for all ceramic tiles
PCI FT® Flex
Polymer modified tile adhesive specially for large-format fully vitrified flagstones
PCI FT® Flex
Polymer modified tile adhesive specially for large-format fully vitrified flagstones
PCI FT® Fugenbreit
Joint grout for split tiles, large-size vitrified tiles and non-vitrified tiles
PCI FT® Fugenbreit
Joint grout for split tiles, large-size vitrified tiles and non-vitrified tiles
PCI FT® Fugengrau
Joint grout for non-vitrified tiles and vitrified tiles
PCI FT® Fugengrau
Joint grout for non-vitrified tiles and vitrified tiles
PCI FT® Fugenweiß
Joint grout for non-vitrified tiles and vitrified tiles
PCI FT® Fugenweiß
Joint grout for non-vitrified tiles and vitrified tiles
PCI FT® Klebemörtel
Tile adhesive for non-vitrified tiles and vitrified tiles
PCI FT® Klebemörtel
Tile adhesive for non-vitrified tiles and vitrified tiles
PCI FT® Megafug
Cementitious joint grout for fully vitrified tiles
PCI FT® Ment
Medium bed adhesive for leveling and tile fixing
PCI FT® Rapid
Flexible fast-acting tile adhesive for ceramic coverings
PCI Flexmörtel®
Flexible tile adhesive for all ceramic coverings
PCI Flexmörtel® Premium
Flexible tile adhesive for ceramic tiles and natural stone
PCI Flexmörtel® Premium
Flexible tile adhesive for ceramic tiles and natural stone
PCI Flexmörtel® S1
Flexible tile adhesive for all ceramic coverings
PCI Flexmörtel® S1 Flott
Flexible flowable adhesive especially for large-format floor tiles
PCI Flexmörtel® S1 Flott
Flexible flowable adhesive especially for large-format floor tiles
PCI Flexmörtel® S1 Rapid
Flexible tile adhesive for all ceramic coverings
PCI Flexmörtel® S1 Rapid
Flexible tile adhesive for all ceramic coverings
PCI Flexmörtel® S2
Highly flexible tile adhesive for all ceramic coverings
PCI Flexmörtel® S2
Highly flexible tile adhesive for all ceramic coverings
PCI Gisogrund®
Wash primer / protective primer for walls and floors
PCI Gisogrund® 303
Wash primer for smooth, non-absorbent substrates
PCI Gisogrund® 404
Wash primer for absorbent and non-absorbent substrates
PCI Gisogrund® 404
Wash primer for absorbent and non-absorbent substrates
PCI Gisogrund® Rapid
Fast-acting primer for cementitious and gypsum-based substrates
PCI Gisogrund® Rapid
Fast-acting primer for cementitious and gypsum-based substrates
PCI HSP 34
Wooden floor leveller
PCI Lastogum®
Water resistant, flexible protective coating under ceramic tiles in showers and bathrooms
PCI Lastogum®
Water resistant, flexible protective coating under ceramic tiles in showers and bathrooms
PCI Nanofug®
Multi-use flexible joint grout especially for vitrified tiles and non-vitrified tiles
PCI Nanofug®
Multi-use flexible joint grout especially for vitrified tiles and non-vitrified tiles
PCI Nanofug® Premium
Multi-use flexible joint grout for all tiles and natural stones
PCI Nanofug® Premium
Multi-use flexible joint grout for all tiles and natural stones
PCI Nanolight®
Multi-use light, flexible adhesive for all kinds of substrates and ceramic coverings
PCI Nanolight®
Multi-use light, flexible adhesive for all kinds of substrates and ceramic coverings
PCI Nanolight® White
Multi-use white flexible adhesive for all kinds of substrates and all ceramic coverings
PCI Nanolight® White
Multi-use white flexible adhesive for all kinds of substrates and all ceramic coverings
PCI Novoment® Flow
Ready-mixed flowable screed for self-leveling cement screeds
PCI Novoment® Flow
Ready-mixed flowable screed for self-leveling cement screeds
PCI Novoment® Light
Ready-mixed, light screed mortar for cement screeds with low dead weight
PCI Novoment® Light
Ready-mixed, light screed mortar for cement screeds with low dead weight
PCI Novoment® M1 plus
Ready-mixed, fast-setting screed mortar for fast-curing cement screeds
PCI Novoment® M1 plus
Ready-mixed, fast-setting screed mortar for fast-curing cement screeds
PCI Novoment® M3 plus
Ready-mixed, fast-setting screed mortar for fast track cement screeds
PCI Novoment® M3 plus
Ready-mixed, fast-setting screed mortar for fast track cement screeds
PCI Novoment® Z1
Fast-setting screed cement for fast track screeds
PCI Novoment® Z3
Fast-setting screed cement for fast track screeds
PCI OKL 300
Standard flooring adhesive
PCI PAR 360
SMP parquet adhesive
PCI PAR 365
SMP parquet adhesive
PCI PKL 326
PVC design flooring adhesive
PCI Pecilastic®
Isolating fabric underlay for ceramic and natural stone tiles
PCI Pecilastic®
Isolating fabric underlay for ceramic and natural stone tiles
PCI Pecilastic® U
Waterproofing and isolating membrane underlay for ceramic, mosaic and natural stones
PCI Pecilastic® U
Waterproofing and isolating membrane underlay for ceramic, mosaic and natural stones
PCI Pecilastic® W
Flexible waterproofing membrane underlay for ceramic tiles and natural stones
PCI Pecilastic® W
Flexible waterproofing membrane underlay for ceramic tiles and natural stones
PCI Pecitape® 10 x 10
Special waterproofing collar for waterproof corner and perimeter joints, pipe culverts and floor drains
PCI Pecitape® 10 x 10
Special waterproofing collar for waterproof corner and perimeter joints, pipe culverts and floor drains
PCI Apogel® SH
Silicate cast resin for casting cracks in screeds
PCI Apogel® SH
Silicate cast resin for casting cracks in screeds
- For floors in the interior and exterior (at dry conditions during the installation).
- For casting cracks and dummy joints in mineral screeds.
- For cracks and joints up to a width of approx. 5 mm.
- For producing static bonds.
- Suitable for underfloor heating.
- For gluing metal profiles and nail strips.
- For embedding PCI Apogel Dübel dowels in screed joints.
PCI Carraferm®
Silicone joint sealant for natural stones
PCI Carraferm®
Silicone joint sealant for natural stones
- For indoor and outdoor use.
- For walls and floors.
- For stain-free sealing of construction joints and movement joints between materials made of natural stone such as marble, Solnhofen stone, travertine, granite, etc.
- For stain-free sealing of construction joints and movement joints between materials made of natural stone and concrete, glass, wood, metal, ceramic, sanitary acrylic, PVC and other synthetic material.
- For all living areas, bathrooms, showers, toilet and kitchen; for balconies and terraces.
- PCI Carraferm transparent is well suited to fix bathroom mirrors.
PCI Carraflex®
Flexible thin-bed mortar for natural stones
PCI Carraflex®
Flexible thin-bed mortar for natural stones
- For indoor and outdoor use.
- For walls and floors.
- For laying calibrated natural stones, especially white marble (e.g. Bianco-Carrara, Ajax, Arabescato) as well as Solnhofen stone and Jura marble in a thin adheisve bed.
- On cement screed, rough-ground anhydrite screed, gypsum-based floated screed, concrete and precast concrete elements, aerated concrete, heated screed, plasterboards, gypsum fibre boards, dry screed, insulation boards, plaster slabs, plaster and old wall tiles and floor tiles.
- For residential areas and business areas, basements, attics, hallways, kitchens, bathrooms, lavatories, staircases and base courses of buildings.
- For ceramic tiles, flagstones and fully vitrified tiles if a white and polymer modified adhesive bed is required.
PCI Carrafug®
Special joint grout for natural stone slabs
PCI Carrafug®
Special joint grout for natural stone slabs
- For indoor and outdoor use.
- For walls and floors.
- For heated screeds, balconies and terraces.
- For grouting natural stone slabs such as marble, travertine, granite, Solnhofen stone etc.
- For joint width from 1 to 8 mm.
PCI Carrament® grey
Medium-bed mortar for natural stones and fully-vitrified coverings
PCI Carrament® grey
Medium-bed mortar for natural stones and fully-vitrified coverings
- For indoor and outdoor use.
- For walls and floors.
- For laying natural stone slabs (also free length).
- For laying large-format fully-vitrified flagstones.
- For leveling irregular substrates before laying tiles.
- PCI Carrament grey also suitable to lay clinker bricks in sewage construction.
- On stairs and dados of houses, in living areas, on electric underfloor heating systems, heated screeds, balconies and terraces, in halls, rooms and corridors of industrial buildings, markets, institutional, service and administration buildings.
PCI Carrament® white
Medium-bed mortar for natural stones and fully-vitrified coverings
PCI Carrament® white
Medium-bed mortar for natural stones and fully-vitrified coverings
- For indoor and outdoor use.
- For walls and floors.
- For laying natural stone slabs (also free length).
- For laying large-format fully-vitrified flagstones.
- For levelling irregular substrates before laying tiles.
- PCI Carrament grey also suitable to lay clinker bricks in sewage construction.
- On stairs and dados of houses, in living areas, on electric underfloor heating systems, heated screeds, balconies and terraces, in halls, rooms and corridors of industrial buildings, markets, institutional, service and administration buildings.
PCI Durafug® NT
Cementitious joint grout for commercially used areas, swimming pools and potable water reservoirs
PCI Durafug® NT
Cementitious joint grout for commercially used areas, swimming pools and potable water reservoirs
- For indoor and outdoor use.
- For walls and floors.
- For joint width from 3 - 20 mm for colours 31 Cement grey and 22 Sand grey. For joint width from 1 - 8 mm for colours 16 Silver grey and 20 White.
- For grouting coverings of fully vitrified tiles, vitrified tiles and floor clinker slabs exposed to increased mechanical stress caused by chemicals used for cleaning in industrial and commercially used areas.
- Colours 20 White and 16 Silver grey, 1 - 8 mm joint width, also for glass mosaic, glass tiles and porcelain mosaic.
- For grouting tile coverings in workshops, swimming pools, canteen kitchens, cold storage depots, washing facilities, storage, sales and exhibition rooms.
PCI Epoxigrund 390
Special primer on absorbent and non-absorbent substrates
PCI Epoxigrund 390
Special primer on absorbent and non-absorbent substrates
- For indoor and outdoor use.
- For walls and floors.
- Primer for PCI sealings and PCI coatings on cementitious substrates, mastic asphalt screeds, ceramic tiles, synthetic resin coatings and wooden substrates.
- Primer for floors in the interior before applying floor levellers/fairing coats, also when subsequently gluing parquet flooring on
- concrete floors, cement screeds, calcium sulphate screeds, magnesite screeds
- mastic asphalt screeds
- ceramic tiles and synthetic resin coatings
- wooden substrates
- substrates with residues of dispersion, reaction resin, water soluble (e.g. spent sulphite liquor adhesive) and bitumen adhesives. - Suitable as leveller and/or fairing coat when mixed with silica sand.
- As a binding agent for producing screeds, repair mortars and drain mortars based on epoxy resin.
- Suitable for the use on ships; meets the requirements of Marine Equipment Directive (MED) 96/98/EC.
PCI Epoxigrund Rapid
Special primer on absorbent and non-absorbent substrates
PCI Epoxigrund Rapid
Special primer on absorbent and non-absorbent substrates
- For indoor and outdoor use.
- For walls and floors.
- Primer for PCI sealings and PCI coatings on cementitious substrates, mastic asphalt screeds, ceramic tiles, synthetic resin coatings and wooden substrates.
- Primer for floors in the interior before applying floor levellers/fairing coats, also when subsequently gluing parquet flooring on
- concrete floors, cement screeds, calcium sulphate screeds, magnesite screeds
- mastic asphalt screeds
- ceramic tiles and synthetic resin coatings
- wooden substrates
- substrates with residues of dispersion, reaction resin, water soluble (e.g. spent sulphite liquor adhesive) and bitumen adhesives. - Suitable as leveller and/or fairing coat when mixed with silica sand.
- As a binding agent for producing screeds, repair mortars and drain mortars based on epoxy resin.
- Suitable for the use on ships; meets the requirements of Marine Equipment Directive (MED) 96/98/EC.
PCI FT® Extra
Polymer modified tile adhesive for all ceramic tiles
PCI FT® Extra
Polymer modified tile adhesive for all ceramic tiles
- For indoor and outdoor use.
- For walls and floors.
- For laying non-vitrified tiles, vitrified tiles and fully-vitrified tiles on PCI bonded waterproofing such as PCI Lastogum, PCI Seccoral 1K, PCI Seccoral 2K Rapid, PCI Pecilastic W and PCI Apoflex F/W.
- On cement screeds, rough-ground anhydrite screeds, flowable plaster screeds, render, concrete, heated screeds, mastic asphalt (only indoors), plasterboards, gypsum fibre boards, gypsum planks and plaster.
- For polyurethane foam boards on external basement walls in contact with soil (perimeter insulation) on plaster/render, concrete, brickwork and bonding slurries.
- For mineral fibre boards, e.g. Isover or Rockwool.
- For cut rigid foam boards, e.g. EPS.
- For extruded rigid foam boards, e.g. XPS.
- For adhesive bed thickness from 1 to 10 mm.
PCI FT® Flex
Polymer modified tile adhesive specially for large-format fully vitrified flagstones
PCI FT® Flex
Polymer modified tile adhesive specially for large-format fully vitrified flagstones
- For indoor and outdoor use.
- For walls and floors.
- For all ceramic coverings laid in a thin bed: non-vitrified tiles, vitrified tiles, fully-vitrified tiles, porcelain mosaic, brick tiles and terracotta.
- Especially suitable to lay large-format fully-vitrified tiles on walls.
- On cement screeds, rough-ground anhydrite screeds, gypsum based floated screeds, render, concrete, heated screeds, mastic asphalt (only in the interior), plasterboards, gypsum fiber boards, plaster slabs and plaster.
- For laying tiles and flagstones on PCI bonded waterproofing such as PCI Lastogum, PCI Seccoral 1K, PCI Seccoral 2K Rapid or PCI Apoflex F/W.
- For laying ceramic coverings on PCI Pecilastic isolating membrane as well as PCI Pecilastic W and PCI Pecilastic U waterproofing membranes.
- For adhesive bed thickness from 1 to 5 mm.
PCI FT® Fugenbreit
Joint grout for split tiles, large-size vitrified tiles and non-vitrified tiles
PCI FT® Fugenbreit
Joint grout for split tiles, large-size vitrified tiles and non-vitrified tiles
- For indoor and outdoor use.
- For walls and floors.
- For joint widths from 5 to 20 mm.
- To grout vitrified tiles, non-vitrified tiles, brick tiles, floor clinker tiles and engineered stone.
- To grout facing brickwork.
- To grout ceramic coverings in areas which have to comply with the DVGW leaflets, e.g. potable water tanks or areas where such properties are required; e.g. swimming pools, brewery water storage containers etc.
PCI FT® Fugengrau
Joint grout for non-vitrified tiles and vitrified tiles
PCI FT® Fugengrau
Joint grout for non-vitrified tiles and vitrified tiles
- For indoor and outdoor use.
- For walls and floors.
- For grouting ceramic tiles and flagstones, medium-sized mosaic and small-sized mosaic.
- For grouting vitrified tiles, non-vitrified tiles, vitrified facing bricks, brick tiles, floor clinker tiles and engineered stone.
- For joint width from 2 to 8 mm.
PCI FT® Fugenweiß
Joint grout for non-vitrified tiles and vitrified tiles
PCI FT® Fugenweiß
Joint grout for non-vitrified tiles and vitrified tiles
- For indoor and outdoor use.
- For walls and floors.
- For grouting ceramic tiles and flagstones, medium-sized mosaic and small-sized mosaic.
- For grouting vitrified tiles, non-vitrified tiles, vitrified facing bricks, brick tiles, floor clinker tiles and engineered stone.
- For joint width from 2 to 8 mm.
PCI FT® Klebemörtel
Tile adhesive for non-vitrified tiles and vitrified tiles
PCI FT® Klebemörtel
Tile adhesive for non-vitrified tiles and vitrified tiles
- For indoor and outdoor use.
- For walls and floors.
- For laying non-vitrified tiles, vitrified tiles and fully-vitrified tiles in a thin bed.
- On cement screeds, rough-ground anhydrite screeds, gypsum based floated screeds, renders, concrete, heated screeds, mastic asphalt (indoors only), plaster boards, gypsum fibre boards, plaster slabs and plaster.
- For laying ceramic coverings in areas exposed to permanent wetness such as swimming pools (indoors and out), health spas as well as in wet areas such as showers, toilets, bathrooms and cold storage rooms.
- For adhesive bed thickness from 1 to 5 mm.
PCI FT® Megafug
Cementitious joint grout for fully vitrified tiles
PCI FT® Megafug
Cementitious joint grout for fully vitrified tiles
- For indoor and outdoor use.
- For walls and floors.
- Especially for the efficient grouting of fully vitrified tiles in areas subject to high mechanical loads.
- For grouting wall and floor coverings made of fully vitrified tiles, vitrified tiles and polished, non-absorbent natural stones.
- In residential areas, bathrooms, showers, on balconies and terraces.
- For grouting coverings on a cement screed, anhydrite screed, heated screed, dry screed, render, gauged render, plasterboard, gypsum fibre board, plaster slabs and rigid foam supporting elements (e.g. PCI Pecidur).
- For joint width from 1 to 10 mm.
PCI FT® Ment
Medium bed adhesive for leveling and tile fixing
PCI FT® Ment
Medium bed adhesive for leveling and tile fixing
- For indoor and outdoor use.
- For walls and floors.
- For practically void-free laying of vitrified tiles and fully-vitrified tiles.
- For laying natural stones insensitive to staining.
- For leveling irregular floors.
- For laying tiles on heated screeds.
- For laying terracotta and concrete ashlar with large tolerances in height.
- For adhesive bed thickness from 2 to 25 mm.
PCI FT® Rapid
Flexible fast-acting tile adhesive for ceramic coverings
PCI FT® Rapid
Flexible fast-acting tile adhesive for ceramic coverings
- For indoor and outdoor use.
- For walls and floors.
- For laying ceramic tiles and flagstones on to the bonded screeds PCI Lastogum, PCI Seccoral 1K, PCI Seccoral 2K Rapid, PCI Apoflex and PCI Pecilastic W in accordance with the valid regulations of the building standard list.
- For the installation of fully vitrified tiles on walls and floors.
- On cement screeds, rough-ground anhydrite screeds, gypsum based floated screeds, renders, concrete, heated screeds, mastic asphalt (only indoors), plasterboards and gypsum fibre boards, plaster slabs and plasters.
- For adhesive bed thickness from 1 to 5 mm.
PCI Flexmörtel®
Flexible tile adhesive for all ceramic coverings
PCI Flexmörtel®
Flexible tile adhesive for all ceramic coverings
- For indoor and outdoor use.
- For walls and floors.
- For laying ceramic tiles and flagstones, porcelain mosaic, brick tiles, clinker bricks and fully vitrified tiles.
- In swimming pools, pool surrounds, wet rooms and cold storage depots.
- On cement screeds, rough-ground anhydrite screeds, gypsum based floated screeds, precast concrete elements, aerated concrete, heated screeds, plasterboards, gypsum fibre boards, dry screeds, mastic asphalt (only indoors), insulation boards, plaster slabs, plaster and on existing wall and floor tiles.
- For laying ceramic on the bonded waterproofing PCI Lastogum, PCI Seccoral 1K, PCI Seccoral 2K Rapid and PCI Apoflex F/W in accordance with the official test certificates.
- For laying ceramic tiles on PCI Pecilastic isolating fabric underlay, PCI Pecilastic W flexible waterproofing membrane and PCI Pecilastic U isolating and waterproofing membrane.
- For laying polyurethane foam boards at basement walls in contact with the ground (perimeter insulation) on render/plaster, concrete, brickwork and waterproofing slurry; for mineral fibre boards (e.g. Isover or Rockwool), for cut rigid foam boards (e.g. polystyrene), for extruded rigid foam boards.
PCI Flexmörtel® Premium
Flexible tile adhesive for ceramic tiles and natural stone
PCI Flexmörtel® Premium
Flexible tile adhesive for ceramic tiles and natural stone
- For indoor and outdoor use.
- For floors.
- For covering a cement screed/cementitious heated screed ≤ 4% CM.
- For laying tiles and natural stones.
- Especially for the exterior.
- For balconies, terraces, underfloor heating as well as industrial areas subject to mechanical stress such as halls, rooms and corridors in industrial buildings, markets, institutional buildings, administration buildings and commercial buildings.
- For laying tiles on a cement screed, rough-ground anhydrite screed, heated screed, dry screed, mastic asphalt screed (only indoors) and on old floor tiles.
- For levelling irregular substrates before tiling.
PCI Flexmörtel® S1
Flexible tile adhesive for all ceramic coverings
PCI Flexmörtel® S1
Flexible tile adhesive for all ceramic coverings
- For indoor and outdoor use on walls and floors.
- For the flexible laying of tiles and slabs.
- For laying cement screeds with a residual moisture ≤4% CM*
- For laying ceramic tiles on all PCI bonded screeds.
- For laying tiles on heated screeds.
- For laying tiles in swimming pools, pool surrounds, wet rooms and cold storage depots.
- For laying tiles on mastic asphalt screed (only indoors) and all cement-based and gypsum-based substrates, glass mosaic and porcelain mosaic, firmly adhering PVC coverings and old ceramic coverings.
- For laying polyurethane foam boards at basement walls in contact with the ground (perimeter insulation) on render/plaster, concrete, brickwork and waterproofing slurry; for mineral fibre boards (e.g. Isover or Rockwool), for cut rigid foam boards (e.g. polystyrene), for extruded rigid foam boards.
- For the repair of irregular walls and floors prior to laying tiles and slabs.
PCI Flexmörtel® S1 Flott
Flexible flowable adhesive especially for large-format floor tiles
PCI Flexmörtel® S1 Flott
Flexible flowable adhesive especially for large-format floor tiles
- For indoor and outdoor use.
- For floors.
- For covering a cement screed/cementitious heated screed ≤ 4% CM.
- For laying especially large-format floor tiles.
- For practically void-free laying of large-format vitrified tiles and fully-vitrified tiles; also for coverings with irregular surfaces such as terracotta or Terrazzo.
- For balconies, terraces, underfloor heating as well as industrial areas subject to mechanical stress such as halls, rooms and corridors in industrial buildings, markets, institutional buildings, administration buildings and commercial buildings.
- For laying natural stones insensitive to staining.
- For levelling irregular substrates before tiling.
PCI Flexmörtel® S1 Rapid
Flexible tile adhesive for all ceramic coverings
PCI Flexmörtel® S1 Rapid
Flexible tile adhesive for all ceramic coverings
- For indoor and outdoor use.
- For walls and floors.
- For the flexible laying of tiles and slabs.
- For laying natural stones.
- For laying cement screeds with a residual moisture ≤4% CM.
- For laying ceramic tiles on all types of PCI bonded screeds.
- For laying tiles on a heated screed.
- For laying tiles in swimming pools, pool surrounds, wet rooms and cold storage depots.
- For laying tiles on mastic asphalt screed (only indoors) and all cement-based and gypsum-based substrates, glass mosaic and porcelain mosaic, firmly bonding PVC coverings and old ceramic coverings.
- For laying polyurethane foam boards at basement walls in contact with the ground (perimeter insulation) on render/plaster, concrete, brickwork and waterproofing slurry; for mineral fiber boards (e.g. Isover or Rockwool), for cut rigid foam boards (e.g. polystyrene), for extruded rigid foam boards.
- For the repair of irregular walls and floors prior to laying tiles and slabs.
PCI Flexmörtel® S2
Highly flexible tile adhesive for all ceramic coverings
PCI Flexmörtel® S2
Highly flexible tile adhesive for all ceramic coverings
- For indoor and outdoor use.
- For walls and floors.
- For laying cement screeds/heated cement screeds older ≥ 3 days (as soon as walkable).*
- Especially for laying large-format flagstones on heated screeds.
- For laying ceramic tiles and flagstones, porcelain mosaic, clinker tiles, clinkers and fully vitrified tiles.
- For laying tiles in swimming pools, pool surrounds, wet rooms and cold storage depots.
- On rough-ground anhydrite screed, gypsum based floated screed, precast concrete elements, aerated concrete, heated screed, plasterboards, gypsum fiber boards, dry screed, mastic asphalt (only indoors), insulation boards, plaster slabs, plaster and on existing wall and floor tiles.
- For laying ceramic on PCI bonded waterproofing layers and PCI isolation layers.
- For the repair of irregular walls and floors prior to laying tiles and flagstones.
PCI Gisogrund®
Wash primer / protective primer for walls and floors
PCI Gisogrund®
Wash primer / protective primer for walls and floors
- For indoor and outdoor use.
- For walls and floors.
- For priming prior to applying flowable floor levelers (e.g. PCI Periplan or PCI Periplan Fein), non-sag floor levelers and other mortars and anhydrite screeds which set through hydration.
- For priming walls made of aerated concrete and brickwork prior to applying plaster and lime gypsum plaster.
- For priming absorbent substrates to protect subsequent material from rapid drying.
- For priming anhydrite screeds and building boards.
- For priming mastic asphalt screeds prior to the application of PCI tile adhesives.
- For strengthening mealy, absorbent screed surfaces and plasters indoors before laying tiles and mosaic.
- Acting as a moisture barrier and primer for plaster, plaster slabs, gypsum fiber boards, plaster boards, aerated concrete, concrete, asphalt, render and brickwork before tiling and wallpapering.
PCI Gisogrund® 303
Wash primer for smooth, non-absorbent substrates
PCI Gisogrund® 303
Wash primer for smooth, non-absorbent substrates
- For indoor and outdoor use.
- For walls and floors.
- For priming impermeable, non-absorbent coverings such as Terrazzo, ceramic tiles and flagstones, glazed clinker bricks, natural stone and cast stone, substrates with adhesive residues as well as asphalt tiles or firmly bonding and rough-ground PVC coverings.
- Prior to laying ceramic tiles and flagstones with PCI tile adhesives, such as PCI FT Klebemörtel, PCI Flexmörtel, PCI Nanolight, PCI Rapidlight, etc.
- Prior to rendering with PCI Polycret 5 concrete filler as well as PCI Pericret.
PCI Gisogrund® 404
Wash primer for absorbent and non-absorbent substrates
PCI Gisogrund® 404
Wash primer for absorbent and non-absorbent substrates
- For indoor and outdoor use.
- For absorbent and low-absorbent concrete and screed substrates.
- As special primer for PCI Zemtec 1K, PCI Zemtec 180, PCI Periplan, PCI Periplan Extra, PCI Periplan Plus, PCI Periplan Fein, PCI Periplan Multi and PCI Periplan White.
- As special primer for anhydrite screeds, mastic asphalt screeds, magnesite screeds as well as heated constructions for floor levelers and tile adhesives.
- As special primer for wooden floorboards, particle boards as well as OSB boards.
- As special primer for non-absorbent substrates such as ceramic tiles for subsequent floor leveling compounds and tile adhesives.
- Suitable for the use on ships; meets the requirements of Marine Equipment Directive (MED) 96/98/EC.
PCI Gisogrund® Rapid
Fast-acting primer for cementitious and gypsum-based substrates
PCI Gisogrund® Rapid
Fast-acting primer for cementitious and gypsum-based substrates
- For indoor and outdoor use.
- For walls and floors.
- For priming cement screeds, calcium sulphate screeds, concrete, aerated concrete, masonry, mineral plaster, building boards, gypsum blocks, plasterboards and gypsum fibre boards as a preparatory treatment before laying ceramic tiles.
- For priming concrete floors, cement screeds, calcium sulphate screeds before applying flowable PCI floor levellers (e.g. PCI Periplan or PCI Periplan Fein) as well as non-sag floor levellers and other mortars which set through hydration.
PCI HSP 34
Wooden floor leveller
PCI HSP 34
Wooden floor leveller
- For indoor use.
- Cementitious leveller for smoothing and levelling floors prior to the installation of
- textile flooring and resilient flooring,
- parquet flooring or laminate flooring to be glued. - For producing smooth and level surfaces.
- For levelling
- wooden floors
- particle boards
- OSB boards. - Suitable for levelling concrete floors, cement screeds, calcium sulphate screeds, magnesite screeds, mastic asphalt screeds as well as ceramic tiles or coatings.
- Suitable as filler and performance grout for warm water underfloor heating system recommended for a thin-layer bedding.
- For layer thickness from 3 to 60 mm.
- Suitable for
- underfloor heating
- exposure to chair castors.
PCI Lastogum®
Water resistant, flexible protective coating under ceramic tiles in showers and bathrooms
PCI Lastogum®
Water resistant, flexible protective coating under ceramic tiles in showers and bathrooms
- Liquid waterproofing membrane to be applied by roller, brush or trowel.
- For indoor use.
- For walls and floors.
- For use class A Wall in accordance with the test principles to issue an official test certificate.
- For water exposure class W0-I, W1-I, W2-I (wall) in accordance with DIN 18534.
- For use up to use class W4 to Austrian standard B 3407.
- For wet areas subject to non-pressing water such as bathrooms, showers in residential buildings, hotels, old people's homes and hospitals.
- On moisture-sensitive, absorbent substrates, e.g. plaster, gypsum block, gypsum fiber board, plasterboard, particle board, anhydrite screed in moist and wet areas subject to common domestic use.
- On mineral absorbent substrates, e.g. concrete, screed, render, aerated concrete, cementitious wall levelers such as PCI Pericret and/or PCI Nanocret FC and self-levelers, e.g. PCI Periplan Fein and PCI Periplan.
PCI Nanofug®
Multi-use flexible joint grout especially for vitrified tiles and non-vitrified tiles
PCI Nanofug®
Multi-use flexible joint grout especially for vitrified tiles and non-vitrified tiles
- For indoor and outdoor use.
- For walls and floors.
- For grouting narrow joints in e.g. mosaic coverings and also wide joints in split clinker slabs.
- For non-vitrified tiles, vitrified tiles, split tiles, porcelain mosaic, glass mosaic, glass tiles, brick tiles and terracotta; also suitable for fully-vitrified tiles.
- In residential areas, bathrooms, showers, on balconies, terraces, facades, in public and commercial areas subject to frequent wetness, e.g. shower facilities, saunas, toilets. In showrooms and presentation areas.
- On heated screeds, dry screeds, precast concrete elements, plasterboards, gypsum blocks, particle boards, wooden floorboards and areas subject to extreme variations in temperature.
PCI Nanofug® Premium
Multi-use flexible joint grout for all tiles and natural stones
PCI Nanofug® Premium
Multi-use flexible joint grout for all tiles and natural stones
- For indoor and outdoor use.
- For walls and floors.
- For joint width from 1 - 10 mm.
- For all ceramic tiles, glass mosaic and glass tiles.
- For all natural stones.
- In residential areas, bathrooms, showers, on balconies, terraces, facades, in public and commercial areas exposed to frequent wetness, e.g. shower facilities, saunas, toilets. In showrooms and presentation areas.
- On heated screeds, dry screeds, precast concrete elements, plasterboards, gypsum blocks, particle boards, wooden floorboards and areas subject to extreme variations in temperature.
PCI Nanolight®
Multi-use light, flexible adhesive for all kinds of substrates and ceramic coverings
PCI Nanolight®
Multi-use light, flexible adhesive for all kinds of substrates and ceramic coverings
- For indoor and outdoor use.
- For walls and floors.
- For all substrates: cement screed, rough-ground anhydrite screed, gypsum-based floating screed, concrete, precast concrete elements, aerated concrete, heated screed, plasterboards, gypsum fiber boards, dry screed, magnesite screed, mastic asphalt (only indoors), insulation boards, gypsum blocks, plaster, render, gauged render, brickwork, old ceramic coverings etc., metal substrates (only indoors), firmly adhering PVC coverings.
- For all ceramic coverings laid in a thin bed or medium bed: non-vitrified tiles, vitrified tiles, fully-vitrified tiles, porcelain mosaic, glass mosaic, glass tiles, brick tiles and terracotta.
- For laying tiles and flagstones on PCI Pecidur HR foam supporting elements, PCI Polysilent impact sound insulation and isolation board as well as PCI Pecilastic isolating fabric underlay.
- For laying tiles and flagstones on PCI Lastogum bonded waterproofing (e.g. private bathrooms), PCI Seccoral (e.g. swimming pool and terraces) or PCI Apoflex (e.g. industrial kitchens).
- For repairing and leveling irregular wall surfaces and floor surfaces (e.g. brickwork, render, screed) before laying tiles.
PCI Nanolight® White
Multi-use white flexible adhesive for all kinds of substrates and all ceramic coverings
PCI Nanolight® White
Multi-use white flexible adhesive for all kinds of substrates and all ceramic coverings
- For indoor and outdoor use.
- For walls and floors.
- Colour white.
- For all substrates: cement screed, rough-ground anhydrite screed, gypsum-based floated screed, concrete, aerated concrete, heated screed, plasterboard, gypsum fibre board, magnesite screed, mastic asphalt (only indoors), gypsum block, plaster, render, gauged render, brickwork, old ceramic covering and smooth, wooden substrate able to bear weight such as particle boards, OSB boards etc., metal substrates (only indoors), firmly adhering PVC coverings.
- For all ceramic coverings: non-vitrified tiles, vitrified tiles, fully-vitrified tiles, porcelain mosaic, glass mosaic, glass tiles, brick tiles and terracotta.
- Especially suitable for laying glass tiles and glass mosaic.
- For laying tiles and flagstones on PCI Pecidur HR foam supporting elements, PCI Polysilent impact sound insulation and isolating board as well as PCI Pecilastic isolating and waterproofing membrane.
- For laying tiles and flagstones on PCI Lastogum bonded waterproofing (e.g. private bathroom), PCI Seccoral (e.g. swimming pool and terrace) or PCI Apoflex (e.g. industrial kitchen).
- For repairing and levelling irregular wall surfaces and floor surfaces (e.g. brickwork, render, screed) before laying tiles and flagstones.
PCI Novoment® Flow
Ready-mixed flowable screed for self-leveling cement screeds
PCI Novoment® Flow
Ready-mixed flowable screed for self-leveling cement screeds
- For indoor and outdoor use.
- For areas exposed to permanent wetness.
- For fast-curing bonded screeds and screeds installed on an isolating or insulating layer.
- Suitable for heated screeds.
- For layer thickness from 20 to 80 mm.
- Very low emissions, GEV-EMICODE EC 1 PLUS.
PCI Novoment® Light
Ready-mixed, light screed mortar for cement screeds with low dead weight
PCI Novoment® Light
Ready-mixed, light screed mortar for cement screeds with low dead weight
- For indoor and outdoor use.
- For areas exposed to permanent wetness.
- For light bonded screeds and screeds installed on an isolating or insulating layer.
- Light mortar for refurbishment of concrete floors and cement screeds.
- For layer thickness from 20 to 80 mm.
- Very low emissions, GEV-EMICODE EC 1 PLUS.
PCI Novoment® M1 plus
Ready-mixed, fast-setting screed mortar for fast-curing cement screeds
PCI Novoment® M1 plus
Ready-mixed, fast-setting screed mortar for fast-curing cement screeds
- For indoor and outdoor use.
- Suitable for direct use.
- For areas exposed to permanent wetness.
- For fast-curing bonded screeds and screeds installed on an isolating layer or insulation layer.
- Suitable for heated screeds.
- As repair mortar for quick repairs of industrial floors.
- For layer thickness from 20 to 120 mm.
- Very low emissions, GEV-EMICODE EC1 PLUS.
PCI Novoment® M3 plus
Ready-mixed, fast-setting screed mortar for fast track cement screeds
PCI Novoment® M3 plus
Ready-mixed, fast-setting screed mortar for fast track cement screeds
- For indoor and outdoor use, also for direct use.
- For areas exposed to permanent wetness.
- For fast track bonded screeds and screeds installed on an isolating or insulating layer.
- Suitable for heated screeds.
- As repair mortar for concrete floors and cementitious screeds.
- For layer thickness from 20 to 80 mm.
PCI Novoment® Z1
Fast-setting screed cement for fast track screeds
PCI Novoment® Z1
Fast-setting screed cement for fast track screeds
- For indoor and outdoor use.
- For producing fast track
- screeds on an isolating layer or insulating layer
- bonded screeds. - Suitable for heated screeds.
PCI Novoment® Z3
Fast-setting screed cement for fast track screeds
PCI Novoment® Z3
Fast-setting screed cement for fast track screeds
- For producing bonded screeds and screeds on an isolating layer or insulating layer (also heated screeds).
- For indoor and outdoor use, also suitable for direct use.
- For areas exposed to permanent wetness.
- For bonded screeds to be covered at an early stage.
PCI OKL 300
Standard flooring adhesive
PCI OKL 300
Standard flooring adhesive
- Dispersion adhesive for floors in the interior.
- For gluing
‑ textile flooring (tufted and woven wall-to-wall carpet and fibre bonded carpet)
‑ CV flooring
‑ PVC flooring (rolls and tiles)
- PVC coated cork tiles
- linoleum flooring in rolls; cork linoleum
‑ PCI sound reducing underlays. - Suitable for underfloor heating.
- Suitable for exposure to chair castors to DIN EN 12529.
- Suitable for cleaning by wet shampooing and spray extraction.
PCI PAR 360
SMP parquet adhesive
PCI PAR 360
SMP parquet adhesive
- SMP parquet adhesive for interior floors.
- For gluing
- on-edge strip parquet flooring to EN 14761
- mosaic parquet elements to EN 13488
- multi-layer parquet flooring to EN 13489 (two-layer parquet floorboards up to max. 120 cm, three-layer parquet floorboards up to max. 250 cm)
- laminate flooring. - Suitable for underfloor heating.
- Suitable for gluing PCI DU 903 FH sound reducing underlay.
PCI PAR 365
SMP parquet adhesive
PCI PAR 365
SMP parquet adhesive
- For floors in the interior.
- For gluing
- on-edge strip parquet to EN 14761
- solid wood parquet elements to EN 13226
- solid wood overlay flooring elements to EN 13228
- mosaic parquet elements to EN 13488
- multi-layer parquet elements to EN 13 489
- laminate flooring
- wood blocks RE (for use e.g. in administrative buildings, hobby rooms and in residential areas)
- wood blocks WE (for use e.g. in workrooms and rooms with similar wear without extreme climate fluctuation and exposure to vehicles and forklifts except for light loads)
- exotic wood, e.g. bamboo. - Suitable for underfloor heating.
- Suitable for gluing PCI DU 903 FH sound reducing underlay.
- Suitable for gluing PCI Pecilastic W flexible waterproofing membrane, PCI Pecitape 120 special waterproofing tape as well as PCI Pecitape 90° I prefabricated internal corner element and PCI Pecitape 90° A prefabricated external corner element as waterproof layer under parquet flooring in private bathrooms (moisture resistance class A0).
- Suitable for gluing 2-layer and 3-layer parquet elements with tongue and groove on calcium sulphate flowable screeds from CASEA GmbH and Knauf Gips KG already at a residual moisture level smaller 1.5% (measured with CM meter). Suitable for use within the system with PCI Pecilastic U waterproofing and isolating membrane. The parquet elements must be approved by the parquet manufacturer for full-surface gluing.
PCI PKL 326
PVC design flooring adhesive
PCI PKL 326
PVC design flooring adhesive
- Dispersion adhesive for floors in the interior.
- For gluing
- PVC design flooring,
- PVC flooring in rolls and tiles,
- CV flooring,
- natural rubber flooring up to a thickness of 2 mm. - Suitable for underfloor heating.
- Suitable for exposure to chair castors to DIN EN 12529.
PCI Pecilastic®
Isolating fabric underlay for ceramic and natural stone tiles
PCI Pecilastic®
Isolating fabric underlay for ceramic and natural stone tiles
- For indoor use.
- For outdoor use as an underlay for the bonded waterproofing PCI Seccoral 1K and/or 2K Rapid.
- For floors and walls.
- Isolating fabric underlay for ceramic and natural stone tiles.
- For all substrates able to bear weight (also with existing cracks) and a mixture of substrate types such as concrete floors, cement screeds, anhydrite screeds, mastic asphalt screeds, old parquet flooring with good adhesion, render, gauged render and plaster.
- Can be applied in the categories EK-W, EK-G, EK-M (outdoors in combination with PCI Seccoral 1K / 2K Rapid in accordance with the ZDB Merkblatt "Entkoppelungssysteme" (ZDB leaflet "isolating systems")).
PCI Pecilastic® U
Waterproofing and isolating membrane underlay for ceramic, mosaic and natural stones
PCI Pecilastic® U
Waterproofing and isolating membrane underlay for ceramic, mosaic and natural stones
-
For indoor and outdoor use.
-
For floors.
-
For wet locations subject to non-pressing water such as bathrooms, showers in residential buildings, hotels, old people's homes and hospitals.
-
For balconies and terraces.
-
For all sizes of ceramic and natural stones.
-
On moisture sensitive, absorbent substrates, e.g. particle boards, OSB boards, magnesite screeds, gypsum fiberboards, anhydrite flowable screeds or gypsum-based screeds.
-
On mineral, absorbent substrates, e.g. concrete, screed, and self-leveling compounds, e.g. PCI Periplan.
-
On mineral, non-absorbent substrates, e.g. old ceramic tiles, mastic asphalt screeds (only indoors).
- On underfloor heatings.
- On green cement screeds (minimum quality CT F4) as soon as walkable and able to bear weight.
-
On anhydrite screeds with a residual moisture level < 2% (measured with a CM meter) when laying ceramic and natural stones.
- Can be applied in the categories: EK-W-AIV-S, EK-H_(AIV)-S, EK-G-AIV-S, EK-H-(AIV)-S in accordance with the ZDB Merkblatt "Entkoppelungssysteme" (ZDB leaflet "isolating systems").
PCI Pecilastic® W
Flexible waterproofing membrane underlay for ceramic tiles and natural stones
PCI Pecilastic® W
Flexible waterproofing membrane underlay for ceramic tiles and natural stones
- For indoor and outdoor use.
- For walls and floors.
- Suitable for use classes A, B and C in accordance with the test principles to issue an official test certificate.
- Suitable for wet areas subject to non-pressing water such as bathrooms, showers in residential buildings, hotels, old people's homes and hospitals.
- Suitable for water exposure classes W0-I, W1-I, W2-I to DIN 18534.
- For balconies and terraces.
- For swimming pools.
- For waterproofing under ceramic tiles subject to chemical loads, e.g. in industrial kitchens, breweries, dairies, beverage industry, slaughterhouses, cold storage rooms, paper mills, laboratories, hospitals etc.
- On moisture sensitive, absorbent substrates, e.g. plaster, gypsum floorboard, gypsum fibreboard, plasterboard, particle board, anhydrite screed in damp and wet areas subject to common use in households.
- On mineral, absorbent substrates, e.g. concrete, screed, render, aerated concrete, cementitious fairing coat for walls such as PCI Pericret, PCI Nanocret FC/R2/R3/R4, and self-levelling compounds such as PCI Periplan.
- With official test certificates.
- For steam cabins.
- Waterproofing under parquet flooring in private bathrooms (moisture use class A0).
PCI Pecitape® 10 x 10
Special waterproofing collar for waterproof corner and perimeter joints, pipe culverts and floor drains
PCI Pecitape® 10 x 10
Special waterproofing collar for waterproof corner and perimeter joints, pipe culverts and floor drains
Tiling and flooring work with environmentally compatible construction materials from PCI
Before tiles or other flooring materials are installed on screed, isolating products should first be laid. For this purpose, the PCI range features various isolating products. These include the low-emission construction materials PCI Pecilastic® for laying ceramic and natural stone coverings, the insulation tape PCI Pecitape® Silent and PCI Polysilent® isolation boards.
For flooring insulation, environmentally compatible floor laying materials such as leveling compounds and adhesives for rubber, wood, linoleum and parquetry are available from PCI. Environmentally sound construction materials also include selected tile adhesives from our range. You can choose flexible materials such as PCI Carraflex® and PCI Flexmörtel® or special adhesives for the installation of critical natural stones, depending on the individual requirements of your project.
PCI: low-pollutant construction materials for grouting and waterproofing
Substrates in bathrooms and other wet rooms pose special requirements for bonded waterproofing under tiles. To meet these requirements, PCI has developed environmentally sound construction materials with waterproofing and isolating functions. PCI Lastogum® liquid applied waterproofing agent provides a solvent-free, waterproof protective layer for substrates in showers and bathrooms which has no detrimental impact on the environment or on installation personnel.
For the subsequent grouting of swimming pools or drinking water tanks, PCI Durafug® provides a low-pollutant solution. The appropriate silicone sealants PCI Silcoferm® S and PCI Silcofug® E can be used in a variety of indoor and outdoor applications. Thanks to their elastic properties, they accommodate both expansion and contraction.